Rane SIXTY-EIGHT Manuel de l'opérateur télécharger pdf (Page 41)

Using LiveFeed

1. Locate the LiveFeed les in your library.

Type “livefeed” into the search box and

you will see:

2. Decide which source you want to

LiveFeed.

a. To feed from a phono or CD (pre-

selector input), drag its corresponding

LiveFeed USB Channel Input 1, 2, 3 or 4

onto any Deck.

b. To feed a pre-selector input, the insert,

either mic or the mix, rst select it from

the Input Source drop-down in the

Record window.

3. Load the desired LiveFeed le to

either Deck. The waveforms will start

to build in the track overview and

main waveform display as the input

is recorded, you can now use the

recording as normal. Performing a

needle drop on the record brings the

playhead back to the “now” position in

the audio stream.

LiveFeed

LiveFeed allows you to stream a USB

record channel from the Sixty-Eight to a

Virtual Deck. This includes any Phono/

Line/S/PDIF input, either Mic, FlexFx

Insert or the Mix. You can then instantly

play the recording back just like a normal

audio le — you can scratch it, speed it

up, slow it down, set loops and set cue

points.

There are two recording options,

Normal and Gated. The Normal option

means recording will begin as soon as

the normal Livefeed track is loaded to the

Virtual Deck. The Gated option means that

after a Gated Livefeed track is loaded,

recording only begins once the set gate

level is exceeded (thus avoiding periods

of silence). You can set the gate level

by clicking the dropdown menu in the

LiveFeed lename. A lower gain setting

makes the gate more sensitive.

The amount of time available to record

is determined by your audio cache setting.

The track overview display shows the

amount of usable audio you have to play

with from the recording. Click anywhere

in the track overview display to jump to

your desired position in the recording. See

“Audio Cache” on page 47.

Mixing

With One

Turntable Or

CD Player

This single turntable technique allows you

to mix as if you had two turntables, using

just one. If one of your turntables is not

performing properly, or if you only have

one available, you will be able to continue

to mix the way you are used to.

The following is a step-by-step

description of how to perform a mix using

only your right turntable or CDJ with the

instant doubles feature.

Menu Settings

Go to the Setup menu, click on the

Playback tab. Make sure Instant doubles

is checked, and Lock playing deck is

unchecked.

1. Load a track onto the Right Deck in

Scratch Live and play as usual.

2. Put the Left Deck into INT mode.

3. Load the same song you have playing

on the Right Deck onto the Left Deck.

The track on the Left Deck will start

playing from the same point and at the

same pitch as the Right Deck.

4. You can now quickly slide your mixer’s

crossfader over to the Left Deck.

5. Your Right Deck is now free to load up

a new song ready to mix in.

6. Repeat!

TIP: Instant doubles works with either

Deck.

See “Lock Playing Deck” on page 44.

See “Instant Doubles” on page 45.

RANE SIXTY-EIGHT MIXER FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.4.4

41

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Commentaires sur ces manuels

Pas de commentaire