Rane SL 3 Manuel de l'opérateur télécharger pdf (Page 12)

RANE SL3 FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.5.0

12

Playback

Control

The Control Record

The control record has two sides. The

rst side is 10 minutes long and contains

the Vinyl Scroll section. The second side

is 15 minutes long. Scratch Live can be

congured to work with records playing

at either 33 RPM or 45 RPM, depending

on your preference. The record has thin

marks every minute, and a thicker mark

every 5 minutes (when playing at 33

RPM). These marks are to assist you when

using needle dropping to move through

the track. These marks do not affect the

playback of the track.

The mode will switch when it reaches

the end of the record so your track won’t

stop. See “Absolute Mode” on page

16.

T

H

E

V

I

N

Y

L

S

C

R

O

L

L

T

R

A

C

K

The Control CD

The control CD

has two tracks.

The rst track is 15

minutes long and

controls playback.

The second track

is 40 seconds long

and controls vinyl

scroll.

Vinyl Scroll

Vinyl Scroll allows you to select and load

tracks using only your turntables (or CD

player) – no contact with the computer

necessary! To use Vinyl Scroll with

turntables, lift the needle off the record

and drop it into special “bonus track”

section at the end of the record’s A side.

The movement of the control disk now

controls the selected track within your

library. Lift the needle out of the Vinyl

Scroll section of the record and into the

lead out (between the Vinyl Scroll area and

the end of the record) to change crates

or iTunes playlists. Go back to the Vinyl

Scroll area of the record to choose a track

within the crate or playlist. Once you have

found the track you wish to play, put the

needle back at the beginning of the record

and it will load automatically.

This feature is available to CD users.

Go to track 2 on the control CD to access

Vinyl Scroll. Find the track you want to

load, and go back to track 1. The track

you selected will be loaded and ready to

play. You can reverse the direction of Vinyl

Scroll and set the sensitivity in the Setup

screen.

TIP: You can also use Vinyl Scroll in the

Prepare window. See the options for

“Vinyl Control” on page 33.

Virtual Deck

The Virtual Deck

shows everything

about the speed

and position of a

track. As the vinyl

rotates, so does

the line on the

label. The circular

progress bar around the edge is a visual

representation of the position within the

song, and can be set to ash to warn

you that the track is nearing its end. The

time and remaining time are displayed in

minutes and seconds. The pitched BPM

(BPM with pitch adjustment multiplier

added) is shown on the left of the Virtual

Deck, and the turntable speed as a

percentage pitch shift is shown on the

right of the Virtual Deck. If the track has

no BPM information, pitched BPM will not

be shown.

If you are playing regular vinyl, notice

the Virtual Deck behaving strangely as

Scratch Live attempts to decode the

incoming signal. This will not cause any

problems, but you may nd it distracting.

You can unload the currently loaded track

using the Virtual Deck eject button.

TIP: Use the keyboard shortcut shift-

alt-arrow to unload a track from the

Virtual Deck.

Main Screen

Overview

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Commentaires sur ces manuels

Pas de commentaire